Facade element LUNOtherm B

Ventilation grilles on the outer wall are often perceived as a disturbing element of the exterior view. With the LUNOtherm facade element the air intake opening now disappears from the wall surface. The development of the LUNOtherm makes unrestricted facade design possible. For the first time, all the advantages of the LUNOS 160 ventilation units, such as high air throughput, draught-free, hygienic and sound insulation, can be realised in combination with an almost invisible exterior view. ... learn more

The 160 series for renovation and new construction with LUNOtherm and LUNOtherm FS

For this purpose, LUNOtherm is inserted into the insulation layer of the thermal insulation composite system as the final element of the 160 series. The air opening is then located in the window lintel, in the window reveal or under the window. It can be installed above, to the side, next to or under the window, so that the combination with a roller shutter box is also possible without any problems.

Single facade element with DIBt approval on the market

The LUNOtherm is supplied in insulation thickness and is processed by the facade builder in the same way as an insulation board of the ETICS. Since LUNOtherm is installed in the fire flashover area, its suitability was tested within the scope of the general building inspection approval of the DIBt. Thus, LUNOtherm B may be installed in flame-retardant ETICS according to DIN 4102B1 up to an insulation thickness of 300 mm.

 

Technical specifications

LUNOtherm B and LUNOtherm B FS

Use in flame-resistant ETICS according to DIN 4102-B1. The insulation core is protected by an inner and outer mineral encapsulation. Element FS for installation under the window.

Insulation thickness 60 - 300 mm
Dimensions 1000 x 500 mm (515 mm FS)