The Silvento ec as a clamp fan - quickly installed

Exhaust air series

The Silvento ec is an extract air unit that works very efficiently and can already be operated with low volume flows.

Special features

The Silvento ec clamp fan can be installed particularly quickly and easily.

You determine the functions of the Silvento ec by selecting the various control boards. This makes it a true all-rounder.

You can choose from four different boards to control the Silvento ec:

Basic board: The Silvento ec has seven ventilation levels between 15 and 60 m³/h. They can also be combined with time delay, interval switching and switch-on delay.

Comfort board: In addition to the capabilities of the basic board, this is also equipped with a humidity and temperature sensor. A finer and more individual humidity control, which even controls the fan without permanent basic ventilation, has never been available before.

Comfort+: In addition to the familiar switching, time and configuration options (e.g. switch coupling, time follow-up, interval or humidity sensors), the Comfort+ (pronounced Comfortplus) board now offers a brand new VOC sensor. In addition, an integrated humidity and temperature sensor system or CO2-equivalence control can be switched on and optionally available motion sensors or radio modules can be integrated.

Basement board: With the basement board, the Silvento ec ensures clean and hygienic ventilation of the basement area. Commissioning is carried out in conjunction with the circuit board type 5/EC-KE and the switch type 5/W2 FK. The fan permanently records the air humidity and forms an average value, which can be achieved by ventilation.

All modules can be combined with plug-on extension modules:

The motion detector module with a radar-supported motion detector makes switches superfluous. All control techniques of the basic module are triggered via the motion detector.

With the help of the optional radio module, the Silvento ec can be controlled remotely by radio from external controls, sensors or with radio switches without any additional wiring.

Installation

Installation in areas 1 and 2 in bathrooms and shower rooms in accordance with VDE 100 is permitted.

Approval

The Silvento ec has the general building authority approval Z-51.1-215 of the DIBt.

Extra

To extend the range of functions and to use logging functions, the Silvento ec can be used with the diagnostic software.

Due to its extremely low energy consumption, the Silvento ec is so efficient that it does not fall into the classification for the energy label and therefore must not be labelled at all.

Art.-no. 40078, Art.-no. 40079

Der Klemmlüfter Silvento ec kann besonders schnell und einfach installiert werden.

Technical specifications
Silvento-Type V-ec or KL-ec Boards
5/EC-ZI (90)
5/EC-FK (90)
5/EC-FK+ (90)
Volume flow 15/20/30/40/45/50/60/(90) m³/h
Sound power level LW 18/22/29/36/38/40/44/(52) dB(A)
Sound pressure level at 1 metre distance 10/14/21/28/30/32/36/(44) dB(A)
Sound pressure level at 3 metre distance 0/5/12/18/20/23/26/(34) dB(A)
Power consumption 1,8 - 6,2 (14,5) W
Supply voltage 200 - 240 V AC 50/60 Hz
Control voltage 0 - 10 V
Protection class IPX5

 

 

Choose the following for the clamp fan

1) One of four control boards

2) One of the expansion modules

3) Diagnostic software

 

 

View the Silvento in 3-D directly in our virtual home:

to LUNOS living