How to change the filter on the Silvento ec

The Silvento ec is a modern and efficient fan that ensures optimal indoor air quality. To ensure that the device continues to operate reliably, it is important to maintain the filter regularly and clean or replace it as needed. Below you will find detailed step-by-step instructions on how to correctly replace the filter in the Silvento ec.

Please observe the following sequence:

1. 1. Filter change display:
      When a red light illuminates on the device, it indicates that the filter needs to be replaced. This indicator serves as a reminder to maintain air quality and fan performance.

   2. Removing the screen:
      Before you can remove the filter, you must first remove the fan screen. To do this, grasp the screen at the front and carefully pull it forward. Be careful not to tilt the screen to avoid damage.

   3. Remove and clean the filter:
      Now carefully pull the filter forward and out of the device. In most cases, the filter can be cleaned. To do this, wash it thoroughly with clean water and allow it to dry completely before reinserting it. A clean and dry filter ensures that the fan functions optimally.

   4. Reinsert the filter and perform a reset:
      Reinsert the cleaned and dried filter into the device. To reset the filter change display, press the reset button on the device for at least 3 seconds and then release it. The red light will go out, confirming that the filter change has been performed correctly.

   5. Reattach the screen:
      Finally, place the screen back on the front of the fan frame and press it lightly until it clicks into place. The filter replacement is now complete and the Silvento ec is ready for use again.

Done!
Regular maintenance ensures that your Silvento ec always works efficiently and provides a pleasant indoor climate.

⇒ Note: If you would prefer to watch a video showing how to change the filter on the Silvento ec, we have illustrated this process clearly in the video.